RELATED PRODUCTS
FlexSwitch cPCI-24+2R
- CompactPCI Fully Managed Gigabit Ethernet Switch
- Flexibility and Performance
FlexSwitch cPCI-24+2R provides the ideal blade switching solution for telecom equipment manufacturers seeking superior flexibility and performance in a CompactPCI (cPCI) form factor.
The 24+2R is a 26-port, non-blocking, fully-managed Ethernet switch with 24 10/100 autosensing Fast Ethernet ports which can be accessed via the midplane for intra-chassis switching (PICMG 2.16 compliant) or via the rear transition module for external switching. The two Gigabit Ethernet ports can be accessed through the rear transition module.
The 24+2R provides full wire-speed Layer 2 switching support for up to 16K MAC addresses, 256 IEEE 802.1Q Virtual LANs, IP multicasting, full- and half-duplex flow control, and IEEE 802.1p/Q Quality of Service.
The 24+2R enables high-speed communications between elements in Continuous Computing's cPCI systems without external hubs that often block airflow. Its vertical, low-power design increases system density, lowers cost, and provides seamless system integration. The blade can operate in a cPCI slot or in an isolated backplane and supports TCP/IP and serial management interfaces.
Engineered for carrier-class performance and designed as a modular switching blade for telecom deployment, the 24+2R is built on industry standards to ensure easy integration and management.
Coupled with Continuous Computing's complete family of cPCI solutions and Trillium protocol software, the 24+2R provides the fastest path from application development to deployment revenue.
FEATURES + BENEFITS
HIGH PERFORMANCE SWITCH
- Provides full wire-speed Layer 2 switching with true non-blocking architecture
- Up to 16K MAC addresses
- 256 IEEE 802.1Q Virtual LANs
- Full-Duplex Flow Control (802.3x)
HIGH-DENSITY CONNECTIVITY
- Provides 24 x 100Base-TX ports
- Dual 1000Base-TX ports
FLEXIBLE MANAGEMENT OPTIONS
- SNMP management
- Web-based network management
- Telnet for remote control
- RMON
REAR I/O
- 3 RJ-45 connectors for 10/100Base-TX
- 2 RJ-45 connectors for 10/100/1000Base-TX
- DB-9 serial connector for out-of-band management
SPECIFICATIONS
SWITCHING
- Up to 16K MAC addresses
- 256 IEEE 802.1Q Virtual LANs
- Full-Duplex Flow Control (802.3x), backpressure for half-duplex
- IP Multicasting supported through IGMP snooping
- Switching method: single store and forward at ingress port and cutthrough switching at destination ports
- QoS: IEEE 802.1p/Q with 4 Priority Transmission queues, Weighted
- Fair Queuing, and user-mapping of priority levels and weights
MANAGEMENT SOFTWARE MODULES
- SNMP management
- Web-based network management
- Telnet for remote control
- RMON
- IEEE 802.1d Spanning Tree
- IEEE 802.1p/Q GARP/GVRP
FRONT PANEL LEDS & CONNECTORS
- 24 100Base-TX Link and Activity LEDs each
- 2 1000Base-TX Link and Activity LEDs each
- Hot Swap LED
- OK-to-Pull LED
- DB9M management processor console port
ADDITIONAL FEATURES
- Downloadable firmware upgrades to support new standards
- Secure MAC addresses are not aged out
- Flooding and broadcast control
- Port trunking and load sharing for high bandwidth links
- 24 10/100Base-TX and 2 10/100/1000Base-TX ports through rear transition module
TRANSITION CARD
- Single slot
- 3 RJ-45 connectors for 10/100Base-TX
- 2 RJ-45 connectors for 10/100/1000Base-TX
- DB-9 serial connector for out-of-band management
INDUSTRY STANDARDS
- PICMG 2.16 compliance
MECHANICAL & ENVIRONMENT
- Electrical: 15W of +3.3VDC
- Mechanical: CompactPCI 6U, 1 slot (160mm x 233.35mm x 20mm)
- Temperature: -5degC to 55degC (Operating)
- Humidity: 5% to 90% relative humidity noncondensing
- Altitude: 3000m
CERTIFICATIONS
- UL/cUL 1950 3rd Edition Recognized Component
- FCC Class A
- Designed for Telcordia NEBS GR-63-CORE Level 3
- Designed for Telcordia NEBS GR-1089-CORE Level 3
- Designed for UL, cUL, CE
